Intra-continental deformation and tectonic evolution of the West Junggar Orogenic Belt,Central Asia:Evidence from remote sensing and structural geological analyses     

Wei-Cui Ding  Ting-Dong Li  Xuan-Hua Chen  Jian-Ping Chen  Sheng-Lin Xu  Yi-Ping Zhang  Bing Li  Qiang Yang 《地学前缘(英文版)》2020,(2):651-663

The West Junggar Orogenic Belt(WJOB)in northwestern Xinjiang,China,is located in the core of the western part of the Central Asian Orogenic Belt(CAOB).It has suffered two stage tectonic evolutions in Phanerozoic,before and after the ocean–continental conversion in Late Paleozoic.The later on intracontinental deformation,characterized by the development of the NE-trending West Junggar sinistral strike-slip fault system(WJFS)since Late Carboniferous and Early Permian,and the NW-trending Chingiz-Junggar dextral strike-slip fault(CJF)in Mesozoic and Cenozoic,has an important significance for the tectonic evolution of the WJOB and the CAOB.In this paper,we conduct geometric and kinematic analyses of the WJOB,based on field geological survey and structural interpretation of remote sensing image data.Using some piercing points such as truncated plutons and anticlines,an average magnitude of^73 km for the left-lateral strike-slip is calculated for the Darabut Fault,a major fault of the WJFS.Some partial of the displacement should be accommodated by strike-slip fault-related folds developed during the strike-slip faulting.Circular and curved faults,asymmetrical folds,and irregular contribution of ultramafic bodies,implies potential opposite vertical rotation of the Miao’ergou and the Akebasitao batholiths,resulted from the sinistral strike-slipping along the Darabut Fault.Due to conjugate shearing set of the sinistral WJFS and the dextral CJF since Early Mesozoic,superimposed folds formed with N–S convergence in southwestern part of the WJOB.  相似文献   

基于一维综合孔径微波辐射计的海面温度反演研究   总被引：1，自引：0，他引：1  

艾未华  冯梦延  陈冠宇  陆文 《海洋学报(英文版)》2020,42(5):115-122

Due to the low spatial resolution of sea surface temperature(T_S) retrieval by real aperture microwave radiometers,in this study, an iterative retrieval method that minimizes the differences between brightness temperature(T_B)measured and modeled was used to retrieve sea surface temperature with a one-dimensional synthetic aperture microwave radiometer, temporarily named 1 D-SAMR. Regarding the configuration of the radiometer, an angular resolution of 0.43° was reached by theoretical calculation. Experiments on sea surface temperature retrieval were carried out with ideal parameters; the results show that the main factors affecting the retrieval accuracy of sea surface temperature are the accuracy of radiometer calibration and the precision of auxiliary geophysical parameters. In the case of no auxiliary parameter errors, the greatest error in retrieved sea surface temperature is obtained at low T_S scene(i.e., 0.710 6 K for the incidence angle of 35° under the radiometer calibration accuracy of0.5 K). While errors on auxiliary parameters are assumed to follow a Gaussian distribution, the greatest error on retrieved sea surface temperature was 1.330 5 K at an incidence angle of 65° in poorly known sea surface wind speed(W)(the error on W of 1.0 m/s) over high W scene, for the radiometer calibration accuracy of 0.5 K.  相似文献   

粉质土海底边界层动态演化过程波浪水槽实验     

文明征  贾永刚  王振豪  张少同  单红仙 《海洋学报(英文版)》2020,42(5):96-104

The objectives of this study are carried out a series of controlled large wave flume experiments using fine-grained sediment from the Huanghe River Delta, exploring the complete sequence of sediment behavior in the bottom boundary layer(BBL) during wave-induced liquefaction. The results show that:(1) The BBL in silty seabed is exposed to a progressive wave, goes through a number of different stages including compaction before liquefaction, sediment liquefaction, and compaction after liquefaction, which determines the range and thickness of BBL.(2) With the introduction of waves, first, the sediment surface has settled by an amount S(S=1–2 cm) in the course of wave loadings with an insufficient accumulation of pore water pressure. And a thin high concentration layer formed the near-bed bottom.(3) Once the liquefaction sets in, the liquefied sediment with an ‘orbital motion' and the sub-liquefied sediment form a two-layer-sediment region. The range of BBL extends downwards and stopped at a certain depth, subsequently, develops upwards with the compaction process. Meanwhile, resuspended sediments diffuse to the upper water column.(4) During the dynamics process of the BBL beneath progressive waves, the re-suspended sediment increment ranked as sediment liquefaction erosion before liquefaction compaction after liquefaction.  相似文献   

北京地区Landsat 8 OLI高空间分辨率气溶胶光学厚度反演   总被引：3，自引：0，他引：3  

田信鹏  孙林  刘强  李秀红 《遥感学报》2018,22(1):51-63

卫星气溶胶光学厚度(AOD)反演中,传统暗目标方法在反射率较低的水体、浓密植被覆盖区域取得了较好效果,在反射率较高且结构复杂的高反射地表上空目前多采用深蓝算法,但存在空间分辨率较低,对细节分布描述性较差等问题。为解决这一问题,本文首先以5年(2008年—2012年)长时间序列MODIS地表反射率产品为基础,采用最小值合成法建立500 m分辨率逐月地表反射率产品数据集,然后利用地物波谱库中典型地物波谱数据,分析建立MODIS与Landsat 8 OLI传感器蓝光波段反射率转换模型,最后北京地区AERONET地基观测数据确定了气溶胶光学物理参数,并反演获取了北京地区上空500 m分辨率的AOD分布。为验证反演算法的精度,分别将反演结果同AERONET及MODIS/Terra气溶胶产品(MOD04)进行交叉对比,同时利用相关系数R,均方根误差RMSE,平均绝对误差MAE以及MODIS AOD产品预期误差EE共4个指标进行衡量。结果表明:算法反演获取的AOD与AERONET观测值具有较高的一致性,各指标分别为R=0.963,RMSE=0.156,MAE=0.097,EE=85.3%,稍优于MOD04产品(R=0.962,RMSE=0.158,MAE=0.101,EE=75.8%),并且有效的对比点数也高于MOD04。通过与地基观测相比,卫星遥感获取的高分辨率城市地区AOD精度可作为定量评估城市空气质量的有效依据。  相似文献   

一种改进扩展卡尔曼滤波算法的GPS多径抑制应用     

李基武  符强  孙希延  黄仁义  刘迎 《测绘科学》2018,(6):167-172

在用EKF算法消除微弱GPS卫星信号中的噪声,并估计出多径幅度与码相位时延的码跟踪环中,由于各种误差的存在,从而降低了环路的跟踪性能。针对这一问题,该文在EKF算法的基础上提出了一种LSEKF算法,该LSEKF算法用最小二乘估计的原理对EKF算法所用的采样观测点进行修正,构造出一组无偏、均方误差和最小与空间分布确定的新型采样观测点,用来进行后续的滤波估计。仿真结果表明,相比EKF算法,LSEKF算法拥有更高的伪码跟踪精度,而且收敛速度更快,跟踪门限也更低。  相似文献   

北京市基本比例尺地形图一体化数据库建设与应用     

夏强  王星杰 《北京测绘》2018,32(3):306-311

本文结合实际工作,介绍了北京市基本比例尺地形图一体化数据库环境配置方案和创建方法。通过对数据库软硬件配置的调试,总结出满足空间数据更新要求的参数配置方案。通过对服务器连接方式的比较,分析出不同连接方法对入库速度的影响。通过和传统空间数据库的比较,分析出一体化实时更新机制的地理空间数据库具有更新节奏快、现势性强、数据提供方便、节省入库周期等优势。同时,这种数据库搭建方法有效地解决了数据的入库、更新、管理、应用等一系列问题,使内业入库、外业操作、数据库应用和管理方便高效。  相似文献   

多功能测绘模拟实验系统摄影装置的设计与应用     

贾周云  张献伟  熊强  王春祥  胡倩伟 《测绘工程》2018,(8):72-75,80

对多功能测绘模拟实验系统摄影装置进行优化设计,能够搭载单相机、五镜头倾斜相机和云台+单相机3种摄影装置,通过控制系统控制可移动轨道和摄影装置运行,并使摄影装置拍摄轨道下方的沙盘影像,模拟室外航空摄影测量,生产出沙盘的"4D"成果和三维沙盘模型等成果,实现摄影测量从影像数据获取、数据生产、成果应用的全过程模拟。  相似文献   

A new multipath mitigation method based on adaptive thresholding wavelet denoising and double reference shift strategy   总被引：1，自引：0，他引：1  

Mingkun Su  Jiansheng Zheng  Yanxi Yang  Qiang Wu 《GPS Solutions》2018,22(2):40

Multipath disturbance is one of the major error sources in high-accuracy positioning for global navigation satellite system (GNSS). Although various methods based on software and hardware strategies have been developed to mitigate this error, they are still limited by different kinds of factors and the effect is not ideal. After analyzing the existing methods, a new single-difference sidereal filtering method, based on adaptive thresholding wavelet denoising and double reference shift strategy (ATDR), is proposed to mitigate multipath effects for static short-baseline GNSS applications. The key idea of the proposed method is the use of both the adaptive thresholding wavelet denoising to extract an accurate multipath correction model from the reference Day and the double reference shift strategy to mitigate multipath for subsequent Day 2 more accurately and efficiently. By applying the introduced adaptive thresholding method, the average improvement rate of the RMS values of the single-difference residuals can reach about 15.82% compared with the constant thresholding method. Moreover, after applying the proposed ATDR method, the 3D positioning precision is improved by about 37.73% for the single epoch mode with 30 s data sampling rate and about 31.22% for the continuous mode with 1 s high sampling rate compared with the original results. Even compared with the constant thresholding single orbital reference (CTSR) method, the improvement percentage is about 33.94% in single epoch mode and about 25.40% in continuous mode for 3D positioning precision, respectively. In conclusion, the results of the two experiments indicate that the proposed ATDR method performs much better than the CTSR method in mitigating multipath for different sampling rates and different processing modes in the measurement domain for GNSS static short-baseline postprocessing applications.  相似文献   

川滇区域活动块体运动与应变特征地震影响分析     

党亚民  杨强  梁诗明  王伟 《测绘学报》2018,47(5):559-566

本文利用川滇1999—2007、2009—2015年GNSS实测速度场,通过引入平移-旋转-应变模型,构建该区域地震前后的活动块体运动和应变模型,有效对块体运动和块体的应变特征进行了分离,并据此分析了该区域地震前后块体运动和应变特征。结果表明,巴颜喀拉和羌塘块体东向运动有明显增大趋势;汶川地震后川滇块体与羌塘块体边界带相对挤压运动明显增大,巴颜喀拉-华南块体边界带南段形成了较大的挤压应变,川滇块体与华南块体相对运动没有明显变化。  相似文献   

山西芦芽山地区树木年轮记录的1676 AD以来5～7月温度变化   总被引：7，自引：1，他引：6  

易亮  刘禹  宋惠明  李强  蔡秋芳  杨银科  孙军艳 《冰川冻土》2006,28(3):330-336

在山西芦芽山地区采取了符合国际树轮库要求的油松样本,通过交叉定年和应用区域生长模型,建立长度为328 a的标准宽度年表.根据RCS序列所揭示的气候低频变化特征,确定1676 AD以来夏季温度可划分为两个时段:1676—1865 AD和1866—2003 AD.在1676—1865 AD时期,夏季温度变化主要表现为“冷强暖弱”,其中1710—1720s为最冷时段.1866—2003 AD时期,夏季温度呈现出“总体持续变暖,冷暖交替频繁”的变化特征.  相似文献